Sidebar

INSTA360 X5 Battery

VSP38929-INSTA360-X5-Battery-web_D1
VSP38929-INSTA360-X5-Battery-web_D6
VSP38929-INSTA360-X5-Battery-web_D5
VSP38929-INSTA360-X5-Battery-web_D4
VSP38929-INSTA360-X5-Battery-web_D3
VSP38929-INSTA360-X5-Battery-web_D2

Ingin promo terbaik? Silahkan klik
BlibliTokopediaTikTok ShopShopee
Safe Payment

Pay with the world’s most popular and secure payment methods

Support 24/7

Round-the-clock assistance for a smooth shopping experience.

Fast Shipping

Shipping within 24 hours after order completed.

SKU: VSP38929 Category: Brand: Brand:
34 orders in the last 30 days.

Availability: Out of stock

Rp789.000

Out of stock

Add to Wishlist
Add to Compare
Share it:

INSTA360 X5 Battery

Sebagai salah satu komponen penting untuk memaksimalkan penggunaan kamera 360 INSTA360 X5, pemilihan INSTA360 X5 Battery yang tepat akan memastikan Anda tidak kehilangan momen berharga.
  • Built for Insta360 X5.
  • 2400mAh capacity for extended shoots.
  • Cold-resistant, performs reliably at -20°C (-4°F).

Compatibility

X5

Battery

Official Insta360 X5 battery designed to keep your shoots running longer, even in extreme conditions.

 

 

Massive capacity, non-stop shooting.

Up to 135 minutes of 5.7K30fps recording time. Our 2400mAh battery fuels uninterrupted creativity.

 

 

Simply smarter storage.

The included case not only protects your battery but also offers dual SD card slots for easy organization and transport.

 

*Battery case not included with Utility Fast Charge Case purchase.

 

 

Ready for the cold, every time.

Engineered to perform at -20°C, get full power even in freezing environments.

 

 

Specifications

 

In the Box

  • 1× Battery
  • 1× Battery Case

 

 

Specs

Battery Capacity::

  • 2400mAh

Rated Power Energy::

  • 34Wh

Nominal Voltage::

  • 89V⎓

Limited Charge Voltage::

  • 48V⎓

Operating Temperature::

  • -20°C ~ 40°C (-4°F ~ 104°F)

Charging Temperature::

  • 0°C ~ 40°C (32°F ~ 104°F)

 

 

 

Notes

  1. Use only official Insta360 batteries. Damage caused by third-party batteries voids warranty.
  2. Allow batteries to cool to ambient temperature before charging. Charging above 40°C may cause swelling, leakage, overheating or permanent damage.
  3. Do not expose the battery to liquids. If submerged, discontinue use immediately and dispose properly after drying. Dried batteries must not be reused.
  4. Avoid using or storing batteries in extreme temperatures. Prolonged exposure to high/low temperatures may degrade battery life and reduce runtime. Recommended storage conditions: -10°C~35°C for up to 3 months at <75% RH.
  5. Never store batteries in fully discharged state to prevent irreversible cell damage from over-discharge. Recharge every 3 months to maintain optimal performance.

 

 

Notes
  1. When removing air bubbles, scrape from the lens end of the screen protector towards the “Insta360” at the bottom.
  2. Do not reuse a screen protector. Any particulate matter collected on the screen protector may cause air bubbles and reduce adhesiveness.
  3. If the screen protector moves during installation, use the film removal stick to remove it and repeat the steps in the How to Use section. Do not completely remove an installed screen protector.

Notes
  1. Do not apply too much pressure when installing or removing a Lens Guard, as this may damage or change the shape of the base.
  2. Ensure both Lens Guards are securely installed before using the camera. The notch of each Lens Guard must be aligned with the camera’s microphone. If the notch isn’t aligned, the camera will not be able to recognize the Lens Guard.
  3. Only once the screen-side Lens Guard is installed will the icon display on the camera’s status bar and the popup message appear.
  4. If you install the Lens Guards while the camera is recording, saving, updating or formatting, the camera will display the status icon but not the prompt.
  5. The Lens Guards may slightly affect the camera’s stitching ability. To get the best results, point one lens at your subject.
  6. Dirty or worn Lens Guards may affect overall image quality.
  7. Avoid using the Lens Guards in wet conditions as their seal is not waterproof.
  8. If the Lens Guards do get wet, dry each lens thoroughly with a soft cloth to avoid fogging.
  9. The Lens Guards contain magnets. Keep them away from pacemakers and other devices affected by magnetic interference.

 

Tujuan Pengiriman

Related Products