PEAK DESIGN PL-AN-1 Anchor Mount

Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile, unobtrusive way possible. Unlike a tripod plate, Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus, when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses. Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible.

1 ON THE SIDE, 1 ON THE BOTTOM

We often recommend attaching 1 end of your PD strap to your camera’s side strap lug (opposite the grip) and the other end to the bottom. These 2 connection points let the camera hang with the lens facing down for greater comfort and stability, especially with longer primes and zooms. Anchor Mount is the most low-profile, unobtrusive connection point available for PD Anchors and standard camera straps.

WORKS WITH ALL PD STRAPS

Attach PD Anchors to increase your carry options with any of our straps. Compatible with all versions of our Anchors and straps.

WORKS WITH OEM STRAPS

Attach any standard camera neck strap or wrist strap. Works with strap ends up to 11mm wide.

TWIST RESISTANT

Ultra-secure 4mm hex drive with anti-twist pad.

FITS ANY CAMERA

Screws into any standard 1/4″”-20 tripod socket.

SUPER STRONG

Rugged, weatherproof machined/anodized aluminum construction.

Note: Anchor Mount is not compatible with tripods or Capture system. If you frequently use a tripod or Capture, check out our Standard Plate.

WHAT IS IN THE BOX

1. 1 x Anchor Mount
2. 1 x 4mm hex key

SKU/PART NUMBER:

PL-AN-1

WRIST LOOP SIZE

Diameter when open: 9.7 cm (3.82 in), but easily fits hands 5+ inches wide diameter when cinched: 4.5 cm (1.75 in)

STRAP WIDTH

19 mm (0.75 in)

MATERIALS:

Anodized aluminum plate with hard rubber anti-twist pad, turned/machined stainless steel hex-drive screw

WEIGHT

Unpackaged: 18 g (.71 oz)

Packaged: 36 g (1.3 oz)

SIZE

Length: 30 mm (1.2 in)

Width: 20 mm (.79 in)

Height (protrusion from camera): 5 mm (.20 in)

STRAP LOOP SIZE

Fits straps up to 13mm (.51 in) wide

STRENGTH RATING

Can withstand well over 200 lbs (90 kg), making Anchor Mount safe for use with the largest of professional cameras.